1957-1958 Oldsmobile Series 88 and 98 (EXCEPT Station Wagons) Sending Unit

REPRODUCTION. You are purchasing a sending unit. The mounting gasket is included. The sending unit mount should be oiled prior to installation. Use a lubricant like WD-40 in the two holes on the back of the mount, then move the float arm up and down a few times. This unit is 30 ohms. If you want to test your sending unit, please see our "Instructions" tab.

During installation of this sending unit, you may have to remove the additional ground tab depending on your vehicle.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.