1961-1964 Buick (EXCEPT Special Series) Front Disc Brake Conversion Kit With Booster And Master Cylinder

INTERNATIONAL SHIPPING IS AN ESTIMATE.

SPECIAL ORDER. THIS CAN TAKE 3-4 WEEKS FOR PROCESSING BEFORE YOUR ORDER SHIPS.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

This is one front disc brake conversion kit with a conversion booster and master cylinder. This kit is designed to upgrade the original factory wheels on the car. 

This kit is made to be used on vehicles with 15-Inch wheels or larger. The rotors included in this kit are 12-Inch and require a minimum of 15-Inch wheels. If using a wire wheel or after market rim, spacer plates may be needed - please select from the options above if required. Please specify the bolt pattern on your kit in order to receive the proper rotors needed for your vehicle. If the size you need is not listed, please inquire before ordering. Both standard rotors and drilled and slotted rotors are also available. Drilled and slotted rotors allow for better cooling and help prevent dust build up that can happen with standard rotors. 

The original factory booster has approximately 800-1000 PSI.

This conversion booster has approximately 1200-1400 PSI with 16 inches of vacuum. This has 400-600 PSI more than the original for better stopping power.

The use of this kit requires a dual line brake system. Depending on your model, this may require changing your original tubing. If you would like standard 3/16-Inch tubing included, please select the option above. This will include 25 Feet of 3/16-Inch brake line as well as an assorted fitting kit to help with the conversion and installation.

THIS KIT INCLUDES:

Front Disc Brake Rotors (Select rotor type in options above)

Front Single Piston Loaded Calipers (Including pads)

Front Caliper Brackets

Front Hoses 

Front Bearings and Races

Front Seals

Front Hardware (Including spindle nuts, dust caps, banjo bolts, etc.)

Booster/Master Cylinder (Select proportioning valve needed in options above)

Made in the USA.

*The images are a representation of the product and what is included in each kit. You will get the correct product as ordered.

**These kits are disc brake conversion kits. They are designed to convert vehicles with original drum brakes utilizing the original spindles. Many of these kits will bolt on directly to the original parts but some may need some minor modifications. If you have any questions we do offer tech support. All kits are backed with a 1 year guarantee from date of purchase to be free of defects in materials and workmanship. The guarantee covers replacement of defective part and does not cover installation, labor costs, special freight, or incidental damages and is void in the event of misuse, improper installation, or misdiagnosis.